Centralised control and protection for multiple motors from a single location. Available as conventional MCCs or Intelligent MCCs (IMCC) with fieldbus communication, ready for process automation and SCADA integration.
Starter Types
DOL · Star-Delta · Soft · VFD
Construction
Fixed · Semi · Fully Drawout
Intelligent Options
IMCC with fieldbus / SCADA
Standards
IEC 61439 · IEC 60947-4-1
From simple DOL starters to intelligent motor management systems, every functional unit is engineered for reliability, safety and ease of maintenance.
DOL, Star-Delta, Soft Starter and Variable Frequency Drive (VFD) units in the same or separate boards as required.
Fixed, semi-drawout or fully drawout functional units for rapid isolation and maintenance without powering down the entire board.
Motor protection relays with communication, ready for Modbus, Profibus or Ethernet. Centralised monitoring and diagnostics.
Mechanical and electrical interlocks, shutter systems and padlocking provisions for safe isolation during maintenance.
Push-buttons, selector switches, indicating lamps and provision for remote start/stop from PLC or DCS.
GA drawings, motor list, wiring diagrams, protection settings and O&M manuals with every delivery.
Typical ratings. Final configuration based on motor list and process requirements.
| Parameter | Specification |
|---|---|
| Rated Voltage | 415 V AC, 3-phase, 50 Hz |
| Main Busbar Rating | 400 A – 2500 A (up to 6300 A on request) |
| Short-Time Withstand | 50 – 65 kA for 1 s |
| Form of Separation | Form 2b – 4b (4b preferred for drawout / IMCC) |
| Starter Types | DOL, Star-Delta, Soft Starter, VFD |
| Construction | Fixed / Semi-drawout / Fully drawout |
| Protection per Motor | MCCB/MPCB + Contactor + Overload (thermal / electronic) |
| Degree of Protection | IP42 / IP54 (higher on request) |
| Communication (IMCC) | Modbus RTU / TCP, Profibus, Ethernet options |
| Reference Standards | IEC 61439-1/2, IEC 60947-4-1 |
MCCs are used wherever multiple motors need centralised control and protection.
Process pumps, cooling towers, HVAC and ventilation systems.
Air compressors, process blowers and vacuum systems.
Belt conveyors, elevators, cranes and packaging lines.
Mixers, extruders, mills, presses and production equipment.
Treatment plants, pumping stations and effluent systems.
Large commercial and institutional HVAC motor control.
Complementary solutions
Share your motor list, starter types and any automation requirements. We will prepare a complete technical and commercial proposal.
Request a Quote